Skip to content
Nidec Develops the World’s Smallest ADAS Sensor Fusion Unit Integrating a Monocular Camera and a Millimeter Wave Radar

Press release -

Nidec Develops the World’s Smallest ADAS Sensor Fusion Unit Integrating a Monocular Camera and a Millimeter Wave Radar

Kyoto, Japan: Today, Nidec announced that it has developed a new sensor fusion unit—the world’s smallest sensor of its kind—integrating a monocular camera and a millimeter wave radar. The new sensor can be placed on the windshield behind the mirror just like a monocular camera. With this product, it is possible to solve the problems associated with front grille installation of millimeter wave radars: sensitivity drop due to dirt adhesion, axis misalignment at the time of light collision and influence on the front design.

Moreover, by adopting our newly developed new type of antenna, the millimeter wave radar achieves a detection distance of 200 m or more while the detection accuracy is 90 degrees wide, even though it is installed behind the windshield in the passenger compartment. By realizing a detection distance equivalent to that of front-grille-installed devices, it can be used as an ACC (Autonomous Cruise Control) sensor that allows the vehicle to maintain a constant distance to the preceding vehicle.

Furthermore, by integrating the camera and millimeter wave radar, advanced sensor fusion becomes possible, resulting in optimal control at an earlier timing, in comparison with the conventional separate type sensor fusion, in various conditions and road environments under AEB (Autonomous Emergency Braking) operation.

Nidec aims to expand the use of safety equipment to contribute to a transportation society where all people around the world can enjoy the safety of inexpensive and highly functional sensors that integrate cameras and millimeter wave radars.

Nidec will continue to strive towards the realization of a society free of traffic accidents by further utilizing the safety technology that we have cultivated.

Topics

Categories


Nidec was established in Kyoto, Japan in 1973 by its Chairman, President and CEO Shigenobu Nagamori. In 1979, Nidec became the first company in the world to successfully commercialize a direct drive spindle motor for HDDs based on a brushless DC motor. Since then, the company has grown into a world-leading comprehensive motor manufacturer encompassing approximately 300 subsidiaries employing over 100,000 people throughout the world and with annual sales exceeding $10B. Nidec's motors, drives, generators and related products are found in a diverse range of applications including computers, smartphones, home appliances, automobiles, manufacturing plants, robots and more.

Contacts

Nao Maeda

Press contact Media Relations (China)

Izumi Nagata

Press contact PR Department +81 80-9674-9227

Kana Sato

Press contact PR Department +81 80-7998-4066

Related content

Nidec Develops New Electric Power Steering (EPS) Powerpack for Automobiles

Nidec Develops New Electric Power Steering (EPS) Powerpack for Automobiles

Nidec Corporation is announcing the production design of a fully integrated ECU (Electronic Control Unit) and electric motor for Electric Power Steering (EPS Power-pack). This is a synergy product that combines the technologies of Nidec Corporation and Nidec Elesys Corporation that specializes in electronic control units.

NIDEC GPM is announcing a complete family of electric dry runner water pumps

NIDEC GPM is announcing a complete family of electric dry runner water pumps

So far, electric wet runner water pumps with canned motors have been the predominant technology within the automotive industry. NGPM identified a big improvement potential regarding robustness against blocking, outer size and efficiency. For that reason, a new family of dry runner water pumps without canned motors is being developed.

Inverter (left), Integrated traction motor and gear-box (right)

Nidec Develops New Traction Motor System (E-Axle)

Today, Nidec announced the design concept of a Traction motor system (e-axle), which includes e-machine, inverter and gear-box. Due to the increasing demand of the electrification of passenger vehicles, Nidec has developed this system targeting PHEV and Electric Vehicles.

Nidec to Exhibit Cutting-Edge Electric Power Steering Technology, ADAS Sensing Technology and More at IAA

Nidec to Exhibit Cutting-Edge Electric Power Steering Technology, ADAS Sensing Technology and More at IAA

Today, Nidec, a leading manufacturer of electric motors and peripheral equipment with operations in 43 countries, announced that its automotive division will exhibit at the International Motor Show (IAA) to be held in Frankfurt am Main, September 2017. Visitors to our booth will be greeted with a display of our latest ADAS, powertrain, chassis and vehicle body-related products and technologies.

Nidec to Showcase Latest Automotive Technologies at Auto China 2018

Nidec to Showcase Latest Automotive Technologies at Auto China 2018

Kyoto, Japan: Today, Nidec Corporation announced that its automotive division will exhibit at Auto China 2018 to be held in Beijing, China in April - May this year. Nidec's electric motors are already used in tens of millions of automobiles across the world and Auto China 2018 provides an excellent opportunity for the company to showcase its latest technologies.

Nidec ASI presents the new Ultra Fast Charger for speedy recharging of new-generation electric vehicles: an important asset for the development of the electric car market

Nidec ASI presents the new Ultra Fast Charger for speedy recharging of new-generation electric vehicles: an important asset for the development of the electric car market

The Nidec Group, presents the innovative Ultra Fast Charger (UFC), an advanced system for charging electric vehicles that hooks up to the national grid through charging towers. This solution will help pave the way for the spread of electric vehicles, a market which in many countries is still struggling to get off the ground, but which has huge opportunities for growth in the near future.

For Everything That Spins and Moves

Nidec is the world's leading comprehensive motor manufacturer, specializing in "everything that spins and moves," with a strong focus on the motor business. Nidec's extensive product lineup, which ranges from small precision motors to ultra-large motors, leverages the technological capabilities of its approximately 340 group companies across 46 countries. These products are used in various fields, including IT equipment, automobiles, motorcycles, commerce, and industry. We remain dedicated to providing the world with indispensable products and solutions at an overwhelming speed, utilizing technologies aimed at lightness, thinness, shortness, compactness, and efficiency.

Nidec

Nidec head office (Kyoto, Japan)
338 Kuzetonoshiro-cho, Minami-ku 601-8205 Kyoto
Japan